The most versatile and reliable operator

The EMSW EMO is especially designed for low-energy

applications with high intelligent functions to support safety

and comfort for most types of pedestrian doors.

The operator can be mounted on either side of the door

for pull or push action and is suitable for single- or doubledoors

fitted with butt hinges or pivots.

The EMSW EMO has been developed to comply with

European standards and requirements for low-energy

power-operated doors.

The smart control unit offers added-value features like

power assist, smart double-door controls and monitored

battery back-up for convenience. Other added-value

features are smart lock functions for security, monitored

sensors and low-energy consumption.

Models

• Single operator – one drive unit and one

  control unit fitted under a cover

• Double operator – two drive units with

  control units fitted under the same

  cover for operation of two doors

Arm systems

• Pushing arm system PUSH – The

  operator is installed on the wall on the

  opposite side of the door swing. Door

  opening angle adjustable up to 110°

• Pulling arm system PULL – The operator

  is installed on the wall on the same side

  as the door swing. Door opening angle

  adjustable up to 110°

• Pulling arm system ST-V/H – Used in

  windy conditions when the operator is

  installed on the wall on the same side

  as the door swing. Door opening angle

  adjustable up to 90°

• Drive shaft extensions – Allow the

  operator to be fitted higher on the wall

  or the arm lower on the door leaf

Standard equipment

• Cover – manufactured in clear anodized

  aluminium. End plates made of black

  painted steel sheet

  - Dimensions:

  Height 110 mm

  Depth 130 mm

  Single operator: Length 716 mm

  Special length covers up to 1600 mm

  Double operator: Length optional

  to connect manual and automatic

  activation units, position switches and

  overhead presence detectors (OPD)

• “Push and go” – the door opens

  automatically from closed position if

  manually pushed

• Power assist – the motor gives power

  assist when the door is opened by hand

Accessories and Options

• Extension unit EXU-SI – Used if

  additional functions are required, e.g.

  electro-mechanical lock, program

  selector, emergency battery, kill function

  open/close, key opening and outer

  impulse

• Extension unit EXU-SA – Has inputs

  for both monitored /non monitored

  door mounted sensors, which can give

  presence impulse and/or presence

  detection. Relay output for error or door

  indication is also integrated.

• Sync cable – Used on double doors to

  select the opening and closing order

• Finger trap protection devices

• Manual and automatic activation units

• Impulse and presence detection sensors

• Programme selectors

• Monitored battery backup unit:

  24 VDC 1200 mA

• Electro-mechanical locking connection:

  12 VDC max 500 mA or 24 VDC max

  250 mA

• Power supply: 100-240 V AC, +10/-

  15%, 50/60 Hz

• Power consumption: max. 75 W

• Auxiliary voltage: 24 V DC, max. 400 mA

• Internal control fuse: 2 x T 6.3 AH 250 V

• Door leaf width: max. 1200 mm

• Recommended door weight: max. 90 kg

• Door opening angle: 80 - 110°

• Reveal: Push 0 - 100 mm (300 mm with

  longer telescopic part) / Pull 0 - 130 mm

• Opening and closing time: variable

  between 3 - 6 sec.

• Hold open time: 1.5 - 30 sec.

• Ambient temperature: -20°C to +45°C

• Relative humidity (non-condensing)

  max 85%

• Class of protection: IP20 - to be

  installed internally or externally with

  suitable weater protection

• The EMSW EMO complies with the

  UL 325 ANSI / BHMA A156.19,

  BS7036:1996 part 4 and DIN 18650

  requirements for low-energy

  poweroperated doors