High performance

Many of the most valuable features and innovations that

characterize EntreMatic’s strive for optimal function and

performance are combined in the EntreMatic sliding door

operators EMSL/EMSL T (Telescopic). These operators can

be integrated as part of EntreMatic Profile System, EMPS,

but they can also be adapted to a wide range of different

door and customer requirements.

Easy installation

With all units completely assembled in the support beam

it is equally easy to install as a replacement as for new

installations. Although they are very small and slim in

appearance, it is entirely suitable for the heaviest duty

applications. The operators are pre-programmed to comply

with the customer’s specific requirements for an easy

installation.

To permit safe passage between closing doors, the

doors immediately reverse if an obstruction is detected,

then resume their interrupted movement at low speed to

check whether the obstruction has disappeared or not.

If an obstruction is detected between opening doors and

surrounding walls or interior fittings, the door immediately

stops and then closes after a time delay. To extend the

safety various safety sensors can be used.

The sliding door operators EMSL/EMSL T are

constructed to meet various authority regulations for

Emergency escape routes.

Self-monitoring

The microprocessor has an integral

selfmonitoring device which detects

any interference or faulty signals in

door operation and takes necessary

measures to ensure a safe operation.

Design

The drive unit, control unit,

transmission – or optional emergency

unit and electromechanical locking

device – are all assembled in the

support beam. The drive unit transmits

movement to the door leaves by means

of a tooth belt. The door leaves with

integrated or separately mounted door

adaptors can be adjusted height-,

lengthand depth-wise. Journalled

steel rollers and sliding track made of

high-grade plastic give exceptionally

smooth and silent operation.

Emergency

The EMSL/EMSL T can either

be combined with a mechanical

emergency unit that automatically

opens the doors, or an electronic

emergency unit that automatically

opens the doors, in the event of a

power failure. The EMSL/EMSL T can

also be interfaced with fire alarms or

smoke detectors.

EMSL bi-parting

EMSL single

EMSL T 4 leaf bi-parting

EMSL T 2 leaf, single

Standard equipment

Operator including:

- Support beam with transmission

- Double carriage wheels

- Program selector

- Electronic control unit with plug-in

  connections and power supply

- Partial opening width

- Synchronizing of two operators

Accessories

- Cover in clear anodized aluminium

- Door adaptor for doors up to 65 mm

  thickness made by others

- Program selector

- Electronic emergency opening unit

- Mechanical emergency opening unit

- Break-out unit

- Emergency button

- Microwave or IR activators

- Presence detection photocells

- Electromechanical locking devices

- Interlocking between two operators

- Key switch

- EMPS Profile System

- Power supply: 100 V AC -15% to 240 V

  AC +10%; 50/60 Hz

- Power consumption: max. 250 W

- Recommended max. door weight:

  EMSL bi-parting 100 kg/door leaf

  EMSL single 200 kg

  EMSL T bi-parting 75 kg/door leaf

  EMSL T single 100 kg/door leaf /

- Clear opening:

  EMSL 900 – 2800 mm

  EMSL T bi-parting 1600 – 4000 mm

  EMSL T single 1000 – 4000 mm

- Opening and closing speed:

  variable up to 1,4 m/s (2 leaves)

- Hold open time: 0 – 60 s

- Ambient temperature:

  -20°C to +50°C

- Relative humidity (non-condensing):

  5% to 85%

Authority approval

The EMSL/EMSL T meets the following

requirements;

- EN-50081-1, EN-61000-6-2

- EN-60335-1, EN-60950

- SP MKh P006576, SP P101414

- SP P005875, SP F100650

- SITAC 0002/01

- TÜV NO.: B 01 08 13927 026

- TÜV CB-certificate DE3-1371

- UL File 47833 Vol. 1C Sec. 10

- UL File 47833 Vol. 1C Sec.11